1G SFP LX Industrial 10 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
~May 28, 2025+310 pcs
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 9 dB |
| Transmit min/max per lane | -9 dBm / -3 dBm |
| Receiver min/max per lane | -18 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ABB 3BSE080219R1 compatible
- ADTRAN 1184561PG1 compatible
- ADVA 1061705850-02 compatible
- Alcatel-Lucent Ent. ISFP-GIG-LX compatible
- Allied Telesis AT-SPLX10/I compatible
- Allnet ALL4751-INDU compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- Aruba Networks(ex. HP Network) J4859D compatible
- Axis T8611 compatible
- barox AC-SFP-LX-E-10 compatible
- Blackbox LFP413 compatible
- Broadcom SFP LX compatible
- Brocade / Ruckus E1MG-LX-OM compatible
- Brocade E1MG-LX-OM compatible
- Calix 100-01662 compatible
- Cambium Networks SFP-1G-LX compatible
- Ceragon SFP-GE-LX-EXT-TEMP compatible
- Ciena XCVR-010Y31 compatible
- Ciena XCVR-A10Y31 compatible
- Cisco (ex. Meraki) MA-SFP-1GB-LX10 compatible
- Cisco Systems (ex. Linksys) MGBLX1 compatible
- Cisco Systems GLC-LH-SMD compatible
- Cisco Systems GLC-LX-SM-RGD compatible
- Cisco Systems SFP-GE-L compatible
- ComNet SFP-6 compatible
- CTC Union ISFP-S7020-31-D compatible
- D-LINK DEM-310GT compatible
- Dell 320-2879 compatible
- Dell 331-5309 compatible
- Dell 407-BBOO compatible
- Digitus DN-81011 compatible
- Extreme (ex. Enterasys) I-MGBIC-GLX compatible
- Extreme 10052H compatible
- FibroLAN SF1G-LX1 compatible
- Fortinet FN-TRAN-LX compatible
- Fortinet FR-TRAN-LX compatible
- Guntermann & Drunck SFP-LXI compatible
- Hirschmann M-SFP-LX/LC EEC compatible
- HP H3C JD119B compatible
- Huawei eSFP-GE-LX-SM1310 compatible
- Huawei LTD1302-BH+1 compatible
- Infinera (ex. Transmode) TRX100075 compatible
- Intel SFP LX compatible
- Juniper EX-SFP-1GE-LX compatible
- Juniper QFX-SFP-1GE-LX compatible
- Juniper SFP-1GE-LX compatible
- Juniper SRX-SFP-1GE-LX-ET compatible
- Keymile 37973010 compatible
- Korenix SFPGLX10D-w compatible
- KTI Networks SFP-GLS-10A-A compatible
- kvm-tec KT-7010 compatible
- LANCOM SFP-LX-LC1 compatible
- Lantronix TN-SFP-LX1T compatible
- LevelOne SFP-4210 compatible
- MikroTik S-31DLC20D compatible
- Moxa SFP-1GLXLC-T compatible
- Net Insight NPA0012-L101 compatible
- Nexans 88645870 compatible
- Nexans 88646016 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376720002 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25774AA01 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00028CA compatible
- Nokia Networks FOSC 471880A.101 compatible
- Nokia-Siemens (ex. Atrica) AT10006-ID-R compatible
- OpenGear 569025 compatible
- Overture 3000-167 compatible
- Packetlight SL6 compatible
- Palo Alto Networks PAN-SFP-LX compatible
- Perle PSFP-1000D-S2LC10-XT compatible
- Phoenix Contact FL SFP LX10-B compatible
- Planet MGB-TLX compatible
- RAD SFP-6DH compatible
- Radware 9062066 compatible
- Redlion NTSFP-LX-10 compatible
- Ribbon (ex. ECI) OTGBE-LX compatible
- Rockwell 1783-SFP1GLX compatible
- SAF Tehnika I0AOM001 compatible
- Siemens 6GK5992-1AM00-8AA0 compatible
- Siemens SFP992-1LD compatible
- Sophos ITFZTCHLX compatible
- Telco Systems BTI-MGBIC-GLX-DD-T-LC compatible
- Teleste MSG211A compatible
- Teleste MWG211A compatible
- TP-LINK TL-SM311LS compatible
- Transition Networks TN-SFP-LX compatible
- Ubiquiti Networks SFP LX compatible
- Wago 852-1210 compatible
- Westermo 1100-0541 compatible
- Zyxel SFP-LX-10-D compatible
What customers say
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
FLEXBOX is not only awesome but also easy to use. One of the standout features of FLEXOPTIX is their compatibility with various vendors. Whether you're working with different hardware providers, you can rely on FLEXOPTIX to work seamlessly across different platforms.
Moreover, the support for FLEXBOX and FLEXOPTIX is exceptional. If you encounter any issues or have questions, you can rely on the support teams to provide timely and effective assistance. They are dedicated to ensuring that users have a smooth experience and can make the most of these technologies.
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
We are using FLEXOPTIX industrial grade transceivers in our control systems for power electronics and converters. The FLEXBOX is an invaluable tool, making it super easy and quick to configure transceivers. Even larger numbers can be configured easily with the batch configure option, just plug them in one after the other and the rest happens automatically. The power meter, source control and OTDR features are helpful for lab testing or during commissioning. Thanks, FLEXOPTIX for providing universal transceivers of a high quality at decent prices! Your lightning-fast order processing and shipping speed is also impressive.