1G SFP BiDi LX 20 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
- 1550 nm
- 20 km
- 1.25 G
- BiDi
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
~Jun 4, 2025+102 pcs
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LX |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 20 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -8 dBm / -3 dBm |
| Receiver min/max per lane | -22 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1520 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442120G1 compatible
- ADVA 0061003013 compatible
- Allied Telesis AT-SPBD20-14 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- barox AC-SFP-BIB-LXE compatible
- Bintec SFP-LC-TX/LX/LH compatible
- Blackbox LFP420 compatible
- Brocade / Ruckus E1MG-BXD compatible
- Brocade E1MG-LX-OM compatible
- Cisco Systems GLC-BX-D compatible
- ComNet SFP-12B compatible
- Coriant (ex. Tellabs) 81.S1GBEBX1153S compatible
- Coriant (ex. Tellabs) 82.S1GBEBX1153S compatible
- CTC Union ISFP-S7020-WB-D compatible
- Dell 407-10588 compatible
- Dell 407-BB00 compatible
- Dell 407-BBOO compatible
- DrayTek SFP.0BL.621.202 compatible
- Edge Core ET4203-BX20D compatible
- Extreme 10056 compatible
- FiberPlex SFP-SC24BD-5531-B compatible
- FibroLAN SF1G-SF15 compatible
- Fortinet FG-TRAN-LX compatible
- HP H3C JD119B compatible
- Huawei SFP-GE-LX-SM1550-BIDI compatible
- Infinera (ex. Transmode) TRX100075 compatible
- Intel SFP LX compatible
- Juniper SFP-GE20KT15R13 compatible
- Korenix SFPGLX20B15D compatible
- LANCOM SFP-LX-LC1 compatible
- LevelOne SFP-9331 compatible
- Marconi SU57AE compatible
- MikroTik S-53LC20D compatible
- Moxa SFP-1G20BLC compatible
- Netgear AGM732F compatible
- Nokia (ex. Alcatel-Lucent) 1AB393080006 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25772AB compatible
- Nokia (ex. Alcatel-Lucent) SFP-GIG-BX-D compatible
- Nokia Siemens Networks V50017-U412-K500 compatible
- Nokia-Siemens (ex. Atrica) AT10077-0D-R compatible
- Planet MGB-LB20 compatible
- RAD SFP-17BD compatible
- Raisecom USFP-GB/SS532-DL compatible
- Siemens 6GK6000-8FB52-0AA0 compatible
- Transition Networks TN-SFP-LXB22 compatible
- TRENDnet TEG-MGBS10D5 compatible
- Ubiquiti Networks UF-SM-1G-S YE compatible
- Waystream (ex. Packetfront) SFP-1000BASE-BX20-D1550LC compatible
- Westermo 1100-0559 compatible
- Zyxel SFP-BX1550-20-D compatible
What customers say
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!