25G SFP28 eSR with dual CDR 300 m, λ850 nm, LC-Duplex, Multimode
- 850 nm
- 300 m
- 25.78 G
- 10G ETH
- 25G ETH
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | eSR |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 300 m |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.9 dB |
| Transmit min/max per lane | -8.4 dBm / 2.4 dBm |
| Receiver min/max per lane | -10.3 dBm / 3 dBm (overload) @25G |
| Wavelength TX (Typical) | 850 nm |
| Wavelength TX (Range) | 840 - 860 nm |
|---|---|
| Wavelength RX (Typical) | 850 nm |
| Wavelength RX (Range) | 840 - 860 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | NRZ @25G |
| Extinction Ratio | 3 dB |
| Supported Protocols | 25G Ethernet, 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Alcatel-Lucent Ent. SFP-25G-SR compatible
- Arista SFP-25G-MR-XSR compatible
- Aruba Networks(ex. HP Network) JL485A compatible
- Chelsio SM25G-SR compatible
- Cisco Systems SFP-10/25G-CSR-S compatible
- Cisco Systems SFP-25G-SR-S compatible
- Cumulus Networks SFP28 SR compatible
- Dell 407-BBWK compatible
- Dell 407-BBXU compatible
- Fortinet FN-TRAN-SFP28-SR compatible
- Huawei 02311KNR compatible
- Intel E25GSFP28SR compatible
- Juniper JNP-SFP-25G-SR compatible
- Lenovo 7G17A03537 compatible
- Matrox SFP28 ESR compatible
- NetApp X65404 compatible
- Netgear SFP28-SR compatible
- Nvidia (ex. Mellanox) MMA2P00-AS compatible
- Palo Alto Networks PAN-SFP28-25GBASE-SR compatible
- Pure Storage FA-XR2-25G-Eth-SFP-SR compatible
- QLogic SFP28-25G-SR compatible
- Supermicro AOM-SFP28-25GBE-SR compatible
What customers say
The FLEXBOX is the best thing since sliced bread!
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.