1G SFP BiDi SX 1,000 m, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Multimode
- 1550 nm
- 1 km
- 1.25 G
- BiDi
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Multimode BiDi |
| Compliance Code | BiDi SX |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 1 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 1.06 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 11.5 dB |
| Transmit min/max per lane | -9.5 dBm / -3 dBm |
| Receiver min/max per lane | -21 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN # compatible
- ADVA 0061003012 compatible
- Advantech SFP-GSX/LC-AE compatible
- Alcatel-Lucent Ent. SFP-GIG-SX compatible
- Allied Telesis # compatible
- Araknis Networks AN-ACC-SFP-MMF-350 compatible
- Arista 3rd_Party SFP-1G-SX compatible
- Arista SFP-1G-SX compatible
- Aruba Networks(ex. HP Network) J4858C compatible
- Avaya (ex. Nortel) # compatible
- AVM Fritz!SFP AON compatible
- barox AC-SFP-BIB-SXE compatible
- Brocade E1MG-LX-OM compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Cisco (ex. Meraki) MA-SFP-1GB-TX compatible
- Cisco Systems GLC-SX-MMD compatible
- ComNet SFP-48B compatible
- D-LINK DEM-211 compatible
- D-LINK DEM-311GT compatible
- Dell 407-BBOO compatible
- Edge Core # compatible
- Extreme (ex. Enterasys) # compatible
- Extreme 10051 compatible
- F5 Networks # compatible
- FiberPlex SFP-MC24BD-5531-0 compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Force10 / Brocade # compatible
- Fortinet FN-TRAN-SX+ compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann M-SFP-BIDI Type A LH/LC compatible
- HP H3C JD099B compatible
- Huawei SFP-GE-LX-SM1550-BIDI compatible
- Infinera (ex. Transmode) # compatible
- Intel SFP LX compatible
- Juniper (ex BTI Systems) # compatible
- Juniper EX-SFP-GE10KT13R15 compatible
- Keymile # compatible
- KTI Networks # compatible
- kvm-tec KT-7009 compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne GVT-0300 compatible
- Longshine LCS-MGBIC-SX compatible
- Lynx # compatible
- MikroTik S-85DLC05D compatible
- Motorola # compatible
- Moxa SFP-1G10BLC compatible
- MRV SFP-GD-LX-R compatible
- Netgear AGM731F compatible
- Nokia (ex. Alcatel-Lucent) SFP-GIG-SX compatible
- Nokia Siemens Networks # compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK TL-SM321A compatible
- Transition Networks # compatible
- Ubiquiti Networks UF-SM-1G-S YE compatible
- Waystream (ex. Packetfront) # compatible
- Westermo 1100-0558 compatible
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates.
I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter.
Keep up the good work!