1G SFP BiDi SX 1,000 m, ᵀˣ1310 / ᴿˣ1550 nm, DDM, LC-Simplex, Multimode

- 1310 nm
- 1 km
- 1.25 G
- BiDi
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Multimode BiDi |
Compliance Code | BiDi SX |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 1 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 1.06 Gbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 1 W |
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 11.5 dB |
Transmit min/max per lane | -9.5 dBm / -3 dBm |
Receiver min/max per lane | -21 dBm / -3 dBm (overload) @1G |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1360 nm |
---|---|
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1500 - 1580 nm |
Laser | FP |
Receiver Type | PIN |
Modulation | NRZ @1G |
Extinction Ratio | 6 dB |
Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN # compatible
- ADVA 0061003012 compatible
- Advantech SFP-GSX/LC-AE compatible
- Alcatel-Lucent Ent. SFP-GIG-SX compatible
- Allied Telesis # compatible
- Araknis Networks AN-ACC-SFP-MMF-350 compatible
- Arista 3rd_Party SFP-1G-SX compatible
- Arista SFP-1G-SX compatible
- Aruba Networks(ex. HP Network) J4858C compatible
- Avaya (ex. Nortel) # compatible
- AVM Fritz!SFP AON compatible
- barox AC-SFP-BIA-SXE compatible
- Brocade E1MG-LX-OM compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Cisco (ex. Meraki) MA-SFP-1GB-TX compatible
- Cisco Systems GLC-SX-MMD compatible
- ComNet SFP-48A compatible
- D-LINK DEM-211 compatible
- D-LINK DEM-311GT compatible
- Dell 407-BBOO compatible
- Edge Core # compatible
- Extreme (ex. Enterasys) # compatible
- Extreme 10051 compatible
- F5 Networks # compatible
- FiberPlex SFP-MC24BD-3155-0 compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Force10 / Brocade # compatible
- Fortinet FN-TRAN-SX+ compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann M-SFP-BIDI Type A LH/LC compatible
- HP H3C JD098B compatible
- Huawei eSFP-GE-SX-MM850M compatible
- Huawei SFP-GE-LX-SM1310-BIDI compatible
- Infinera (ex. Transmode) # compatible
- Intel SFP LX compatible
- Juniper (ex BTI Systems) # compatible
- Juniper EX-SFP-GE10KT13R15 compatible
- Keymile # compatible
- KTI Networks # compatible
- kvm-tec KT-7009 compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne GVT-0300 compatible
- Longshine LCS-MGBIC-SX compatible
- Lynx # compatible
- MikroTik S-85DLC05D compatible
- Motorola # compatible
- Moxa SFP-1G10ALC compatible
- MRV # compatible
- Netgear AGM731F compatible
- Nokia (ex. Alcatel-Lucent) # compatible
- Nokia Siemens Networks # compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK TL-SM321B compatible
- Transition Networks # compatible
- Ubiquiti Networks UF-SM-1G-S BU compatible
- Waystream (ex. Packetfront) # compatible
- Westermo 1100-0558 compatible
What customers say
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.
One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.
The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.
In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your FLEXBOX is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates.
I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter.
Keep up the good work!