155M SFP STM-1 BiDi 40 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
- 1550 nm
- 40 km
- 155 M
- BiDi
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi EX |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 155 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 28 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -33 dBm / -10 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 11774 compatible
- ADVA # 11775 compatible
- Allied Telesis # 11777 compatible
- Aruba Networks(ex. HP Network) # 11772 compatible
- Avaya (ex. Nortel) # 11779 compatible
- Brocade # 11780 compatible
- Check Point # 11782 compatible
- Ciena (ex. Nortel) # 11783 compatible
- Ciena XCVR-A40S55 compatible
- Cisco Systems ONS-SI-155-L1 compatible
- D-LINK # 11785 compatible
- Dell # 11784 compatible
- Dell (ex. Force10) # 11792 compatible
- Extreme # 11788 compatible
- Extreme (ex. Enterasys) # 11787 compatible
- F5 Networks # 11789 compatible
- FibroLAN # 11790 compatible
- Fluke Networks # 11791 compatible
- Fortinet # 11793 compatible
- Fujitsu # 11794 compatible
- H3C (ex. 3COM) # 11773 compatible
- Hirschmann # 11795 compatible
- HP H3C # 11796 compatible
- Huawei eSFP-1550/1310-L1.1-BIDI compatible
- Infinera (ex. Transmode) # 11814 compatible
- Intel # 11799 compatible
- Juniper # 11800 compatible
- Juniper (ex BTI Systems) # 11781 compatible
- Korenix SFP100SM40B15D compatible
- KTI Networks # 11801 compatible
- LANCOM # 11802 compatible
- Lenovo (ex. Blade Network) # 11798 compatible
- LevelOne SFP-7431 compatible
- Marconi SU66AB compatible
- MikroTik # 11804 compatible
- Moxa # 11805 compatible
- MRV SFP-FD-BD35 compatible
- Netgear # 11807 compatible
- Nokia (ex. Alcatel-Lucent) # 11776 compatible
- Nokia Siemens Networks V50017-U413-K500 compatible
- Palo Alto Networks # 11810 compatible
- Perle PSFP-100D-S1LC40D compatible
- RAD SFP-18B compatible
- Radware # 11811 compatible
- Ribbon (ex. ECI) OTR1_L5BD compatible
- Riedel 1090084 compatible
- TP-LINK # 11812 compatible
- Transition Networks TN-SFP-OC3SB42 compatible
- Waystream (ex. Packetfront) # 11809 compatible
- Westermo 1100-0155 compatible
What customers say
On more than one occasion the FLEXBOX significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the FLEXBOX a non-negotiable place in my datacenter-go-bag. However what really sets FLEXOPTIX apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
FLEXBOX is not only awesome but also easy to use. One of the standout features of FLEXOPTIX is their compatibility with various vendors. Whether you're working with different hardware providers, you can rely on FLEXOPTIX to work seamlessly across different platforms.
Moreover, the support for FLEXBOX and FLEXOPTIX is exceptional. If you encounter any issues or have questions, you can rely on the support teams to provide timely and effective assistance. They are dedicated to ensuring that users have a smooth experience and can make the most of these technologies.
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.