100M SFP EX 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 155 M
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | EX |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 155 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 29 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -34 dBm / -10 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 10 dB |
| Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1184543P1 compatible
- ADTRAN 1184543PG1 compatible
- ADVA 0061003003 compatible
- Advantech SFP-FXS/LC-30E compatible
- Alcatel-Lucent Ent. SFP-100-SM40 compatible
- Allied Telesis AT-SPFX40 compatible
- Barnfind BTSFP-LX-SM-0140 compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- Brocade / Ruckus OC3-SFP-LR1 compatible
- Ciena (ex. Nortel) NTTP02ED compatible
- Ciena (ex. Nortel) NTTP08EDE6 compatible
- Ciena XCVR-040X31 compatible
- Cisco Systems GLC-FE-100EX compatible
- Cisco Systems ONS-SI-155-L1 compatible
- Cisco Systems SFP-OC3-LR1 compatible
- ComNet SFP-4 compatible
- Coriant (ex. Tellabs) TR-0002 compatible
- Ericsson RDH90120/B0228 compatible
- Extreme 10066 compatible
- FiberPlex SFP-SC03XC-3131-C compatible
- Hirschmann M-FAST SFP-SM/LC compatible
- HP H3C JD090A compatible
- Huawei eSFP-1310nm-L-1.1 compatible
- Huawei eSFP-FE-LH40-SM1310 compatible
- Huawei S-SFP-FE-LH40-SM1310 compatible
- Keymile 37973053 compatible
- Korenix SFP100SM30 compatible
- KTI Networks SFP-FCD-S30-A compatible
- LevelOne SFP-1411 compatible
- Marconi SU66AB compatible
- MRV SFP-O3D-LR1 compatible
- Net Insight NPA0016-LL11 compatible
- Nexans 88645907 compatible
- Nokia (ex. Alcatel-Lucent) 1AB194670005 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376350002 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00036AA compatible
- Nokia (ex. Alcatel-Lucent) OM155M-L1.1 compatible
- Nokia Siemens Networks V50017-U324-K500 compatible
- Nokia-Siemens (ex. Atrica) AT10015-ID-R compatible
- Perle PSFP-100D-S2LC40 compatible
- Planet MFB-F40 compatible
- RAD SFP-3D compatible
- Ribbon (ex. ECI) OTFE_SM compatible
- Ribbon (ex. ECI) OTR1_L3 compatible
- SagemCOM 252586245 compatible
- Telco Systems BTI-SFP-FEX-DD-LC compatible
- Transition Networks TN-SFP-OC3S3 compatible
- Volktek FPM-107-30 compatible
- Westermo 1100-0133 compatible
What customers say
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
On more than one occasion the FLEXBOX significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the FLEXBOX a non-negotiable place in my datacenter-go-bag. However what really sets FLEXOPTIX apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!