10G XFP, 100 GHz Grid - C-Band DWDM ZR with dual CDR 80 km / 23 dB, LC-Duplex

- DWDM 100 GHz
- 80 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ZR |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 80 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
---|---|
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 3.5 W |
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 23 dB |
Transmit min/max per lane | 0 dBm / 4 dBm |
Receiver min/max per lane | -23 dBm / -10 dBm (overload) @10G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
---|---|
Wavelength RX (Range) | 1520 - 1620 nm |
Laser | EML |
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (8G) compatible
- ADTRAN 1442987G8C compatible
- ADVA 1061701401-05 compatible
- Arris 780244 compatible
- Brocade / Ruckus 10G-XFP-ZRD-1538-77 compatible
- Calix 100-01507 compatible
- Ciena (ex. Nortel) NTK588AAE5 compatible
- Cisco Systems XFP-10GZR-OC192LR compatible
- Dell (ex. Force10) GP-XFP-W61 compatible
- Ericsson RDH901011/61 compatible
- Extreme (ex. Enterasys) 10GBASE-ZR-XFP compatible
- Extreme 10261 compatible
- Fujitsu FIM31063/120W61 compatible
- HP H3C JD107A compatible
- Huawei DWDM-XFP10G-1528-77 compatible
- Huawei XFP-STM64-SM1550-80km compatible
- Infinera (ex. Transmode) TRX100032/961 compatible
- Infinera (ex. Transmode) TRX100083/961 compatible
- Infinera TOM-10G-D61-LR2 compatible
- Juniper (ex BTI Systems) BP3AM4LI compatible
- Juniper XFP-10GE-ZR compatible
- Marconi SU69EN compatible
- MRV XFP-DWLR08-61 compatible
- MRV XFP-DWLR08F8-61 compatible
- Net Insight NPA0060-1961 compatible
- Nokia (ex. Alcatel-Lucent) 1AB356630001 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375650001 compatible
- Nokia (ex. Alcatel-Lucent) XFP-10G-DWDM-61 compatible
- Nokia Siemens Networks V50017-U789-K500 compatible
- Nortel / Juniper / NSN XFP-DWDM-23dB-C61 compatible
- Packetlight UL100L-CH61 compatible
- Ribbon (ex. ECI) OTR10_AL61 compatible
What customers say
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.