10G XFP Tunable DWDM ZR with dual CDR 80 km, 97 Channels, 50GHz Grid, C-Band, LC-Duplex, Singlemode
- DWDM 50GHz
- 80 km
- 11.35 G
- Tunable
- 10G ETH
- 10G FC
- STM-64
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode DWDM 50GHz |
| Compliance Code | ZR |
| Distance | 80 km |
| Temperature Range | -5°C - 70°C |
| Bandwidth | 9.95 Gbit/s - 11.35 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 2.5 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 25 dB |
| Transmit min/max per lane | -1 dBm / 3 dBm |
| Receiver min/max per lane | -26 dBm / -4 dBm (overload) @10G |
| Wavelength TX (Typical) | tunable DWDM 50GHz |
| TX Tunable Range | 1528.77 - 1567.13 nm |
| Wavelength RX (Range) | 1525 - 1575 nm |
| Laser | ILMZ |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 3 dB |
| Chromatic Dispersion Tolerance | 0 ps/nm to 1,600 ps/nm @10G |
| Extinction Ratio | 9.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442985G1C compatible
- ADVA 1061701400-01 compatible
- Brocade / Ruckus 10G-XFP-ZR compatible
- Ciena (ex. Nortel) NTK583AAE6 compatible
- Ciena 160-9004-900 compatible
- Cisco Systems DWDM-XFP-C compatible
- Cisco Systems ONS-XC-10G-C compatible
- Ericsson RDH102150/02 compatible
- Extreme (ex. Enterasys) 10GBASE-ZR-XFP compatible
- Extreme 10200 compatible
- Huawei XFP-STM64-T-80km compatible
- Infinera (ex. Transmode) TRX100090/TC compatible
- Infinera TOM-10G-DT-LR2 compatible
- Juniper (ex BTI Systems) BP3AM4TF compatible
- Juniper EX-XFP-10GE80KDWDM compatible
- Juniper XFP-10G-CBAND-T50-ZR compatible
- MRV XFP-DWLR08TC compatible
- Net Insight NPA0038-LR21 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375650046 compatible
- Nokia Networks V50017-U790-K500 compatible
- Nokia Siemens Networks V50017-U792-K500 compatible
- Packetlight UL-TU-FC-80 compatible
- Ribbon (ex. ECI) OTR10T_AL compatible
- Ribbon (ex. ECI) OTRN10_AL20 compatible
- Sorrento Networks GMXFP-10G-40CT-80 compatible
What customers say
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.