10G XFP, 100 GHz Grid - C-Band DWDM ZR+ with dual CDR 100 km / 25 dB, LC-Duplex
- DWDM 100 GHz
- 100 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ZR+ |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 100 km |
| Temperature Range | -5°C - 70°C |
| Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 25 dB |
| Transmit min/max per lane | 0 dBm / 4 dBm |
| Receiver min/max per lane | -25 dBm / -7 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
| Wavelength RX (Range) | 1520 - 1600 nm |
| Laser | EML |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 3 dB |
| Chromatic Dispersion Tolerance | -500 ps/nm to 1,450 ps/nm @10G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN # compatible
- ADVA 0061701811-03 compatible
- ADVA 1061701401-05 compatible
- Allied Telesis # compatible
- Avaya (ex. Nortel) # compatible
- Brocade / Ruckus 10G-XFP-ZRD-1538-77 compatible
- Ciena (ex. Nortel) NTK587AA-E5 compatible
- Cisco Systems XFP-10GZR-OC192LR compatible
- Cyan 280-0016-00 compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) GP-XFP-W61 compatible
- Edge Core # compatible
- Ericsson RDH901011/61 compatible
- Extreme (ex. Enterasys) 10GBASE-ZR-XFP compatible
- Extreme 10261 compatible
- F5 Networks # compatible
- Fortinet # compatible
- Fujitsu FIM31063/120W61 compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- Hitachi # compatible
- HP H3C JD107A compatible
- Huawei DWDM-XFP10G-1528-7 compatible
- Infinera (ex. Transmode) TRX100032/961 compatible
- Juniper (ex BTI Systems) BP3AM4LI compatible
- Juniper XFP-10GE-ZR compatible
- Keysight (ex. Ixia) # compatible
- LevelOne # compatible
- Marconi SU69BD compatible
- McAfee # compatible
- MikroTik # compatible
- Moxa # compatible
- MRV XFP-DWLR08-61 compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) XFP-10G-DWDM-61 compatible
- Nokia Siemens Networks V50017-U789-K500 compatible
- Packetlight UL100L-CH61 compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) OTR10_AL61 compatible
- Transition Networks # compatible
- Zyxel # compatible
What customers say
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!