2.67G SFP STM-16 15 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 15 km
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | STM-16 |
| Distance | 15 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 2.67 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 13 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -18 dBm / -3 dBm (overload) @2G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @2G |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN 1184560P2 compatible
- ADVA 0061705807 compatible
- Allied Telesis # compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- Avaya (ex. Nortel) # compatible
- Barnfind BTSFP-LX-SM-0310 compatible
- Brocade / Ruckus E1MG-LX-OM compatible
- Brocade E1MG-LX-OM compatible
- Check Point # compatible
- Ciena (ex. Nortel) NTTP03CF compatible
- Cisco Systems ONS-SI-155-I1 compatible
- Cisco Systems ONS-SI-2G-I1 compatible
- Cisco Systems ONS-SI-622-I1 compatible
- Cisco Systems SFP-OC48-IR1 compatible
- Coriant (ex. Tellabs) 82.SOC48SR1131S compatible
- Coriant (ex. Tellabs) TR-0007 compatible
- Cyan 280-0010-00 compatible
- D-LINK DEM-210 compatible
- Dell # compatible
- Dell (ex. Force10) GP-SFP2-OC48-1IR1 compatible
- Edge Core # compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei eSFPSM1310-155M-2.5G-15km compatible
- Infinera (ex. Transmode) TRX100040 compatible
- Intel # compatible
- Juniper (ex BTI Systems) # compatible
- Juniper EX-SFP-1GE-LX compatible
- Juniper SFP-1OC48-IR compatible
- Keymile # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Marconi SU68AB compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV SFP-MR27D-IR1-R compatible
- Net Insight NPA0022-LJ11 compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) 1AB194670007 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196360005 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196370006 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376370002 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00028CA compatible
- Nokia Siemens Networks V50017-U340-K500 compatible
- OTN Systems V30813-S2-A1 compatible
- Packetlight SL8 compatible
- Palo Alto Networks # compatible
- Perle PSFP-2GD-S2LC20 compatible
- RAD SFP-26D compatible
- Radware # compatible
- Ribbon (ex. ECI) OTR16_S3 compatible
- TP-LINK # compatible
- Transition Networks # compatible
- Ubiquiti Networks # compatible
- Viavi (ex. JDSU) CSFP-2G5-3-2 compatible
- Waystream (ex. Packetfront) # compatible
What customers say
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.