1G SFP CWDM ZX+ Extended ~140 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 1000BASE-ZX+ Ethernet links
Supported Data Rates: 1.05 Gbit/s - 1.25 Gbit/s
Powerbudget of 36 dB for up to 140 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 70°C
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~140 km / 36 dB
  • 1.25 G
  • Industrial
Protocols
  • 1G ETH
  • 1G FC
Request compatibility
Part number
S.1612.37.xDI
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
1G SFP CWDM ZX+ Extended ~160 km / 41 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
1G SFP CWDM ZX+ Extended | ~160 km / 41 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 219.13 EUR
Lower Temperature Range
1G SFP CWDM ZX+ ~140 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
1G SFP CWDM ZX+ | ~140 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 154.68 EUR
Lower Power Budget
1G SFP CWDM ZX+ Extended ~120 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
1G SFP CWDM ZX+ Extended | ~120 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 148.23 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
14 pcs in stock 92.07 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 11.94 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Type CWDM ZX+
Distance 140 km
Temperature Range -20°C - 70°C
Bandwidth 1.05 Gbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 36 dB
Transmit min/max per lane 2 dBm / 5 dBm
Receiver min/max per lane -34 dBm / -10 dBm (overload)
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1600 nm
Laser DFB
Receiver Type APD
Modulation NRZ
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard (Default) S.1312.37.RDI compatible
Your vendor / compatibility is missing?

What customers say

The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!

Viktor Ekmark Cloud Infrastructure Engineer / Elastx AB

The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!

We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.

The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.

The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.

Tim Waterham ICT Infrastructure Engineer - Wyre Borough Council
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day. With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably. Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver. We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field. Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers CEO/CTO, Oufti Connections
More