1G SFP CWDM ZX+ Extended ~160 km / 41 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~160 km / 41 dB
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM ZX+ |
Distance | 160 km |
Temperature Range | -20°C - 85°C |
Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Externally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 41 dB |
Transmit min/max per lane | 4 dBm / 7 dBm |
Receiver min/max per lane | -37 dBm / -10 dBm (overload) @1G |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
---|---|
Receiver Type | APD |
Modulation | NRZ @1G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN # compatible
- ADVA # compatible
- Allied Telesis AT-SPZX160 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4860C compatible
- Avaya (ex. Nortel) AA1419061-E6 compatible
- Brocade # compatible
- Brocade / Ruckus E1MG-CWDM80-1610 compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Cisco Systems CWDM-SFP-1610 compatible
- D-LINK # compatible
- Dell # compatible
- Extreme 10053 compatible
- F5 Networks # compatible
- FibroLAN SSF1G-LX7-5C-61 compatible
- Fluke Networks # compatible
- Force10 / Juniper # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei # compatible
- Infinera (ex. Transmode) # compatible
- Intel # compatible
- Juniper (ex BTI Systems) # compatible
- Juniper SFP-1GE-LH compatible
- Keymile # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- Motorola # compatible
- Moxa # compatible
- MRV # compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) CWDM-SFP-1610 compatible
- Nokia Siemens Networks # compatible
- Packetlight UL-CWDM-1G-HP-CH1610 compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK # compatible
- Transition Networks TN-SFP-LX16-61 compatible
- Ubiquiti Networks # compatible
- Waystream (ex. Packetfront) # compatible
- Zyxel SFP-ZX-80 compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!