25G SFP28 ER Industrial with dual CDR 40 km, λ1300 nm, LC-Duplex, Singlemode
- 1300 nm
- 40 km
- 25.78 G
- Industrial
- 25G ETH
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Type | ER |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.8 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 16 dB |
| Transmit min/max per lane | -3 dBm / 6 dBm |
| Receiver min/max per lane | -19 dBm / -4 dBm (overload) |
| Wavelength TX (Typical) | 1300 nm |
| Wavelength TX (Range) | 1295 - 1310 nm |
| Wavelength RX (Typical) | 1300 nm |
| Wavelength RX (Range) | 1295 - 1325 nm |
|---|---|
| Laser | EML |
| Receiver Type | APD |
| Modulation | NRZ |
| Transmit and Dispersion Penalty | 4 dB |
| Extinction Ratio | 2.7 dB |
| Supported Protocols | 25G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Extreme 25G-ER-SFP40KM compatible
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.