2.67G SFP STM-16 10 km, λ1310 nm, DDM, LC-Duplex, Singlemode

Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 2.67 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 10 km
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1326.10.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code STM-16
Distance 10 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 6.3 dB
Transmit min/max per lane -11.7 dBm / -3 dBm
Receiver min/max per lane -18 dBm / -3 dBm (overload) @2G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1260 - 1360 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser FP
Receiver Type PIN
Modulation NRZ @2G
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061705805 compatible
  • ADVA 0061705805-02 compatible
  • Brocade / Ruckus E1MG-LX-OM compatible
  • Ciena (ex. Nortel) NTTP03CF compatible
  • Cisco Systems DS-SFP-2G-FC-LW compatible
  • Cisco Systems GLC-LH-SMD compatible
  • Cisco Systems ONS-SE-G2F-LX compatible
  • Cisco Systems ONS-SI-155-I1 compatible
  • Cisco Systems ONS-SI-2G-I1 compatible
  • Cisco Systems ONS-SI-2G-S1 compatible
  • Cisco Systems ONS-SI-622-I1 compatible
  • Cisco Systems SFP-GE-L compatible
  • Coriant (ex. Tellabs) 81.S1GBELX1131S compatible
  • D-LINK DEM-210 compatible
  • Ericsson RDH10247/2 compatible
  • Hirschmann M-SFP-LX/LC compatible
  • Huawei eSFP-GE-LX-SM1310 compatible
  • Infinera (ex. Transmode) TRX100041 compatible
  • Infinera TOM-2.5GMR-SR1 compatible
  • Juniper (ex BTI Systems) BP3AM1MI compatible
  • Juniper SFP-1OC48-IR compatible
  • Marconi SU57AE compatible
  • MRV SFP-DGD-LX compatible
  • MRV SFP-MR27D-IR1-R compatible
  • Net Insight NPA0022-LS11 compatible
  • Netgear AFM735 compatible
  • Netgear AGM732F compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196370006 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB376370002 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00028CA compatible
  • Nokia Siemens Networks V50017-U5440-K500 compatible
  • Packetlight SL8 compatible
  • Perle PSFP-2GD-S2LC20 compatible
  • Ribbon (ex. ECI) OTR16_S3 compatible
  • Sophos ITFZTCHLX compatible
  • Westermo 1100-0132 compatible
Your vendor / compatibility is missing?

What customers say

Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz Chief Technical Officer, GibFibre Ltd
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol
More