2.67G SFP STM-16 Industrial 10 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 2.67 G
- Industrial
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | STM-16 |
| Operating Temperature | Industrial |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 100 Mbit/s - 2.67 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 6.3 dB |
| Transmit min/max per lane | -11.7 dBm / -3 dBm |
| Receiver min/max per lane | -18 dBm / -3 dBm (overload) @2G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
| Wavelength RX (Typical) | 1310 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @2G |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN # compatible
- ADVA 0061705805-02 compatible
- Allied Telesis # compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) # compatible
- Avaya (ex. Nortel) # compatible
- Brocade / Ruckus E1MG-LX-OM compatible
- Brocade E1MG-LX-OM compatible
- Check Point # compatible
- Ciena (ex. Nortel) NTTP03CF compatible
- Cisco Systems DS-SFP-2G-FC-LW compatible
- Cisco Systems ONS-SE-G2F-LX compatible
- Cisco Systems ONS-SI-2G-I1 compatible
- Cisco Systems SFP-GE-L compatible
- D-LINK DEM-210 compatible
- Dell # compatible
- Edge Core # compatible
- Ericsson RDH10247/2 compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Force10 / Juniper # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann M-SFP-2.5-SM-/LC EEC compatible
- Hirschmann M-SFP-LX/LC compatible
- HP H3C # compatible
- Huawei eSFP-GE-LX-SM1310 compatible
- Infinera (ex. Transmode) TRX100041 compatible
- Infinera TOM-2.5GMR-SR1 compatible
- Intel # compatible
- Juniper (ex BTI Systems) BP3AM1MI compatible
- Juniper SFP-1GE-LX compatible
- Juniper SFP-1OC48-IR compatible
- Keymile # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV SFP-DGD-LX compatible
- MRV SFP-MR27D-IR1-R compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) 1AB376370005 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00028CA compatible
- Nokia Siemens Networks V50017-U5440-K500 compatible
- Packetlight SL8 compatible
- Palo Alto Networks # compatible
- Radware # compatible
- TP-LINK # compatible
- Transition Networks # compatible
- Ubiquiti Networks # compatible
- Waystream (ex. Packetfront) # compatible
What customers say
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
When in possession of the FLEXBOX it becomes and indispensable tool in general, and also specifically in managing remote Mobile Base Stations fiber connectivity.
Using the FLEXBOX either with PC or Smartphone is really plug and play with no annoying incompatibility issues at all.
The FLEXBOX together with ease of order and superior delivery times makes it literally unnecessary for us having any significant SFP stock.
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.