622M SFP STM-4 120 km, λ1550 nm, DDM, LC-Duplex, Singlemode

Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 622 Mbit/s
Up to 120 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1550 nm
  • 120 km
  • 622 M
Protocols
  • 100M ETH
  • STM-1
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1506.B.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code STM-4
Distance 120 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 622 Mbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 34 dB
Transmit min/max per lane 2 dBm / 7 dBm
Receiver min/max per lane -32 dBm / -10 dBm (overload) @100M - 800M
Wavelength TX (Typical) 1550 nm
Wavelength TX (Range) 1520 - 1580 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1260 - 1600 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100M - 800M
Extinction Ratio 10 dB
Supported Protocols Fast Ethernet, STM-1, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems GLC-FE-100ZX compatible
  • Cisco Systems SFP-OC12-120 compatible
  • Marconi SU67AC compatible
Your vendor / compatibility is missing?

What customers say

In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
More