100G QSFP28 LR4 ext. with dual CDR 25 km, λ1296-1309 nm, LC-Duplex, Singlemode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-LR4 ext. Ethernet links
Integrated Clock-Data-Recovery (CDR)
power budget for OTU4 application is 6,1dB
Supported Data Rates: 103.12 Gbit/s - 111.8 Gbit/s
Up to 25 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 25 km
  • 111.8 G
  • LC
Protocols
  • 100G ETH
  • 128G FC
  • OTU4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.161HG.25.TXO:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
100G QSFP28 LR4 ext. with dual CDR 20 km, λ1296-1309 nm, LC-Duplex, Singlemode 
100G QSFP28 LR4 ext. with dual CDR | 20 km, λ1296-1309 nm, LC-Duplex, Singlemode
0 pcs in stock As low as 787.39 EUR
Higher Power Budget
100G QSFP28 ER4 Lite with dual CDR 30 km, λ1296-1309 nm, LC-Duplex, Singlemode 
100G QSFP28 ER4 Lite with dual CDR | 30 km, λ1296-1309 nm, LC-Duplex, Singlemode
107 pcs in stock As low as 1,475.35 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
28 pcs in stock 94.05 EUR

Specification

Form Factor QSFP28
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR4 ext.
Distance 25 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s - 111.8 Gbit/s
Bandwith Per Lane 25.78 Gbit/s - 27.95 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 4.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 8.1 dB
Transmit min/max per lane -2.5 dBm / 4.5 dBm
Receiver min/max per lane -10.6 dBm / 4.5 dBm (overload) @100G
Wavelength TX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Wavelength RX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Laser EML
Receiver Type PIN
Modulation NRZ @100G
Extinction Ratio 4 dB
Supported Protocols 100G Ethernet, 128G Fibre Channel, OTU4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 1061800720-01 compatible
  • Arista 3rd_Party QSFP-100G-ERL4 compatible
  • Arista QSFP-100G-ERL4 compatible
  • Brocade 100G-QSFP28-LR4L-10KM compatible
  • Ciena QSFP28 LR4 compatible
  • Ciena XCVR-Q30V31 compatible
  • Cisco Systems ONS-QSFP28-LR4 compatible
  • Cisco Systems QSFP-100G-ER4L-S compatible
  • Cisco Systems QSFP-100G-LR4-S compatible
  • Cumulus Networks QSFP28 ER4 compatible
  • Dell 407-BBSL compatible
  • Dell QSFP28-100G-LR4 compatible
  • Edge Core QSFP28 LR4 compatible
  • Extreme 100G-ER4LT-QSFP40KM compatible
  • Extreme 100G-LR4-QSFP10KM compatible
  • Extreme 10403 compatible
  • F5 Networks OPT-0039-01 compatible
  • HP H3C JL275A compatible
  • Huawei QSFP28 LR4 compatible
  • Infinera (ex. Coriant) ZXS-Q8L4ZZZZ-00 compatible
  • Infinera TOM-100G-Q-LR4 compatible
  • Infinera TOM-100G-Q-LR4L compatible
  • Juniper JNP-QSFP-100G-LR4 compatible
  • Juniper QSFP-100G-ER4L compatible
  • Juniper QSFP-100G-LR4 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
  • Nvidia (ex. Mellanox) MMA1L10-CR compatible
Your vendor / compatibility is missing?

What customers say

We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!

Matthias Götz Managing Director / Blue Taurus GmbH & Co. KG
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.
When in possession of the Flexbox it becomes and indispensable tool in general, and also specifically in managing remote Mobile Base Stations fiber connectivity. Using the Flexbox either with PC or Smartphone is really plug and play with no annoying incompatibility issues at all. The Flexbox together with ease of order and superior delivery times makes it literally unnecessary for us having any significant SFP stock.
Terji Leitisstein Hansen RAN Manager, Vodafone FO
More