25G SFP28 ER with dual CDR 25 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 25 km
- 25.78 G
- 10G ETH
- 25G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | ER |
Distance | 25 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 24.33 Gbit/s - 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.2 W |
---|---|
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 13 dB |
Transmit min/max per lane | 0 dBm / 4.5 dBm |
Receiver min/max per lane | -13 dBm / 2.5 dBm (overload) @25G |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1295 - 1310 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1355 nm |
Laser | DFB |
Receiver Type | IDP |
Modulation | NRZ @25G |
Extinction Ratio | 4 dB |
Supported Protocols | 25G Ethernet, 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.