10G XFP BiDi ER with dual CDR 40 km, ᵀˣ1270 / ᴿˣ1330 nm, LC-Simplex, Singlemode
- 1270 nm
- 40 km
- 11.1 G
- BiDi
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ER |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 16 dB |
| Transmit min/max per lane | 1 dBm / 5 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1270 nm |
| Wavelength TX (Range) | 1260 - 1280 nm |
|---|---|
| Wavelength RX (Typical) | 1330 nm |
| Wavelength RX (Range) | 1320 - 1340 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061701893-01 compatible
- Allied Telesis # 13516 compatible
- Avaya (ex. Nortel) # 13517 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Ciena (ex. Nortel) NTTP80DA compatible
- Cisco Systems XFP-10GER-192IR+ compatible
- Dell (ex. Force10) # 13520 compatible
- Extreme (ex. Enterasys) 10GBASE-ER-XFP compatible
- Extreme 10124 compatible
- Fortinet FG-TRAN-XFPLR compatible
- H3C (ex. 3COM) 3CXFP96 compatible
- Hirschmann # 13521 compatible
- Hitachi # 13522 compatible
- HP H3C # 13523 compatible
- Huawei OSX040B01 compatible
- Juniper (ex BTI Systems) # 13518 compatible
- Juniper XFP-10GE-ER compatible
- LevelOne # 13526 compatible
- MikroTik # 13527 compatible
- Moxa # 13528 compatible
- MRV # 13529 compatible
- Net Insight NPA0038-SR11 compatible
- Nokia (ex. Alcatel-Lucent) 1AB217280001 compatible
- Nokia (ex. Alcatel-Lucent) 3HE05832CA compatible
- Nokia Siemens Networks V50017-U772-K500 compatible
- Palo Alto Networks # 13530 compatible
- Radware # 13531 compatible
- Ribbon (ex. ECI) OTR64_L27BD compatible
- Telco Systems BTI-XFP-XBD40L-DD-27/33S compatible
What customers say
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.