10G XFP BiDi ER with dual CDR 40 km, ᵀˣ1330 / ᴿˣ1270 nm, LC-Simplex, Singlemode
- 1330 nm
- 40 km
- 11.1 G
- BiDi
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ER |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 16 dB |
| Transmit min/max per lane | 1 dBm / 5 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1330 nm |
| Wavelength TX (Range) | 1320 - 1340 nm |
|---|---|
| Wavelength RX (Typical) | 1270 nm |
| Wavelength RX (Range) | 1260 - 1280 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061701894-01 compatible
- Allied Telesis # 13536 compatible
- Avaya (ex. Nortel) # 13537 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Ciena (ex. Nortel) NTTP80DA compatible
- Cisco Systems XFP-10GER-192IR+ compatible
- Dell (ex. Force10) # 13540 compatible
- Extreme (ex. Enterasys) 10GBASE-ER-XFP compatible
- Extreme 10124 compatible
- Fortinet FG-TRAN-XFPLR compatible
- H3C (ex. 3COM) 3CXFP96 compatible
- Hirschmann # 13541 compatible
- Hitachi # 13542 compatible
- HP H3C # 13543 compatible
- Huawei OSX040B00 compatible
- Juniper (ex BTI Systems) # 13538 compatible
- Juniper XFP-10GE-ER compatible
- LevelOne # 13545 compatible
- MikroTik # 13546 compatible
- Moxa # 13547 compatible
- MRV # 13548 compatible
- Net Insight NPA0038-SR11 compatible
- Nokia (ex. Alcatel-Lucent) 1AB217280001 compatible
- Nokia (ex. Alcatel-Lucent) 3HE05832CA compatible
- Nokia Siemens Networks V50017-U772-K500 compatible
- Palo Alto Networks # 13549 compatible
- Radware # 13550 compatible
- Ribbon (ex. ECI) OTR64_L33BD compatible
- Telco Systems BTI-XFP-XBD40L-DD-33/27S compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!