10G XFP, 50 GHz Grid - C-Band DWDM ER with dual CDR Extended 40 km / 14 dB, LC-Duplex

Universal XFP Transceiver - 50 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ER Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 14 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 75°C
Specs
  • DWDM 50 GHz
  • 40 km
  • 11.1 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
X.1696.14.yyy.I

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Temperature Range
10G XFP, 50 GHz Grid - C-Band DWDM ER with dual CDR 40 km / 14 dB, LC-Duplex 
10G XFP, 50 GHz Grid - C-Band DWDM ER with dual CDR | 40 km / 14 dB, LC-Duplex
As low as 516.42 EUR
Higher Power Budget
10G XFP, 50 GHz Grid - C-Band DWDM ZR with dual CDR Extended 80 km / 23 dB, LC-Duplex 
10G XFP, 50 GHz Grid - C-Band DWDM ZR with dual CDR Extended | 80 km / 23 dB, LC-Duplex
As low as 564.82 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
53 pcs in stock 89.10 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 10.76 EUR

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code DWDM ER
Operating Temperature Industrial
Modulation NRZ
Distance 40 km
Temperature Range -20°C - 75°C
Bandwidth 9.95 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 14 dB
Transmit min/max per lane -1 dBm / 4 dBm
Receiver min/max per lane -15 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) Channel 595 - 1529.94 nm
Wavelength RX (Range) 1270 - 1600 nm
Laser EML
Receiver Type PIN
Modulation NRZ @10G
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 8.2 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard (Default) X.1696.14.525.I compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.

Robert Niedermair IT Infrastructure Administrator / INTERCABLE AUTOMOTIVE SOLUTIONS S.r.l.

The FLEXBOX is the best thing since sliced bread!

Stefan Ideler CTO / i3D.net

Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.

Stéphane Gouron Directeur Agence Ouest / S-cube

I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.

Denis Kempeneers Network Consultant / Global Network SRL
More