10G XFP, 50 GHz Grid - C-Band DWDM ER with dual CDR 40 km / 14 dB, LC-Duplex
- DWDM 50 GHz
- 40 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ER |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -1 dBm / 4 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel 595 - 1529.94 nm |
|---|---|
| Wavelength RX (Range) | 1270 - 1600 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.
One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.
The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.
In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.
As a network engineer responsible for programming universal transceivers, I can confidently say that the FLEXBOX is a true game-changer in the field. Its unparalleled capabilities and user-friendly interface makes the process effortless and highly efficient.
One of the standout features of the FLEXBOX is its ability to support a wide range of transceiver types and brands. Whether you're dealing with SFP, SFP+, QSFP, the FLEXBOX has got you covered.
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!