10G XFP, 50 GHz Grid - C-Band DWDM ZR with dual CDR Extended 80 km / 23 dB, LC-Duplex

- DWDM 50 GHz
- 80 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ZR |
Distance | 80 km |
Temperature Range | -20°C - 75°C |
Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 3.5 W |
---|---|
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 23 dB |
Transmit min/max per lane | 0 dBm / 4 dBm |
Receiver min/max per lane | -23 dBm / -10 dBm (overload) @10G |
Wavelength TX (Typical) | Channel 595 - 1529.94 nm |
Wavelength RX (Range) | 1520 - 1600 nm |
Laser | EML |
---|---|
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.