622M SFP STM-4 120 km, λ1550 nm, DDM, LC-Duplex, Singlemode
- 1550 nm
- 120 km
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | STM-4 |
| Distance | 120 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 622 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 34 dB |
| Transmit min/max per lane | 2 dBm / 7 dBm |
| Receiver min/max per lane | -32 dBm / -10 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1520 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 10 dB |
| Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-FE-100ZX compatible
- Cisco Systems SFP-OC12-120 compatible
- Marconi SU67AC compatible
What customers say
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.