2.67G STM-16 SFP CWDM ~100 km / 29 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~100 km / 29 dB
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM STM-16 |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 2.67 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, externally calibrated |
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 29 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -29 dBm / -9 dBm (overload) @2G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @2G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442706PG1 compatible
- ADVA 0061704698 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4860C compatible
- Ciena (ex. Nortel) NTK590TH compatible
- Ciena XCVR-100D61 compatible
- Cisco Systems CWDM-SFP-1610 compatible
- Cisco Systems ONS-SC-Z3-1610 compatible
- Coriant (ex. Tellabs) 81.SOC48IR2AH1S compatible
- Ericsson RDH90120/81728 compatible
- FibroLAN SF2G-LX4-5C-61 compatible
- Huawei CWDM-SFPGE-1611 compatible
- Huawei eSFP-LH80-SM1611 compatible
- Infinera (ex. Transmode) TRX100015/61 compatible
- Infinera TOM-MR-C61-LR2 compatible
- Juniper (ex BTI Systems) BP3AM1CL compatible
- Juniper SFP-1GE-LH compatible
- Marconi SU68AD compatible
- Marconi SU68CU compatible
- Marconi SU68CU-OMS1200 compatible
- MRV SFP-27DCWLR-61R compatible
- Net Insight NPA0023-1610 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196350033 compatible
- Nokia Siemens Networks V50017-U3161-K500 compatible
- Nokia Siemens Networks V50017-U3361-K500 compatible
- Ribbon (ex. ECI) OTR16_L5 compatible
- Ribbon (ex. ECI) OTR1_L5 compatible
- Ribbon (ex. ECI) OTR4_L5 compatible
What customers say
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.