2.67G STM-16 SFP CWDM ~120 km / 34 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~120 km / 34 dB
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM STM-16 |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 120 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 2.67 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, externally calibrated |
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 34 dB |
| Transmit min/max per lane | 4 dBm / 7 dBm |
| Receiver min/max per lane | -30 dBm / -24 dBm (overload) @2G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @2G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 0061704498 compatible
- Ciena (ex. Nortel) NTK596TH compatible
- Cisco Systems ONS-SC-Z3-1610 compatible
- Cisco Systems SFP-CWDM-1610 compatible
- Coriant (ex. Tellabs) TR-0009 compatible
- Huawei eSFP-LH80-SM1611 compatible
- Huawei S-SFP-GE-LH80-SM1610 compatible
- Infinera (ex. Transmode) TRX100026/08 compatible
- Infinera (ex. Transmode) TRX100036/08 compatible
- Infinera TOM-100M-C61-L2 compatible
- Infinera TOM-MR-C61-LR2 compatible
- Juniper SFP-1GE-LH compatible
- Marconi SU68CU compatible
- Net Insight NPA0022-LL11 compatible
- Nokia (ex. Alcatel-Lucent) 3FE29549CA compatible
- Nokia Siemens Networks V50017-U3161-K500 compatible
What customers say
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.