1G SFP CWDM ZX+ ~160 km / 41 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~160 km / 41 dB
- 1.25 G
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM ZX+ |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 160 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, externally calibrated |
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 41 dB |
| Transmit min/max per lane | 4 dBm / 7 dBm |
| Receiver min/max per lane | -37 dBm / -10 dBm (overload) @1G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Accedian Networks 7SX-006 compatible
- ADTRAN 1442351G8 compatible
- Alcatel-Lucent Ent. CWDM-SFP-1610 compatible
- Allied Telesis AT-SPZX160 compatible
- Aruba Networks(ex. HP Network) J4860C compatible
- Avaya (ex. Nortel) AA1419068-E6 compatible
- Brocade / Ruckus E1MG-CWDM80-1610 compatible
- Ciena (ex. Nortel) NTK591TB compatible
- Ciena XCVR-A80D61 compatible
- Cisco Systems CWDM-SFP-1610 compatible
- D-LINK DEM-314GT compatible
- Dell (ex. Force10) GP-SFP2-1Z compatible
- Dell 320-2879 compatible
- Extreme 10053 compatible
- FibroLAN SSF1G-LX7-5C-61 compatible
- Fortinet FG-TRAN-LX compatible
- Hirschmann M-SFP-LH/LC compatible
- Huawei S-SFP-GE-LH80-SM1550 compatible
- Huawei SFP-GE-LH70-SM1610-CW compatible
- Infinera (ex. Transmode) TRX100015/08 compatible
- Juniper SFP-1GE-LH compatible
- LevelOne SFP-3611 compatible
- MikroTik S-31DLC20D compatible
- Motorola 525893-001-00 compatible
- MRV SFP-GDCWZX-61-R compatible
- Netgear AGM733 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25776BA compatible
- Nokia (ex. Alcatel-Lucent) 3HE00070BH compatible
- Nokia Siemens Networks V50017-U3161-K500 compatible
- Nortel / Juniper / NSN SFP-CWDM-41dB-1610 compatible
- Packetlight UL-CWDM-1G-HP-CH1610 compatible
- RAD SFP-7D compatible
- Transition Networks TN-SFP-LX16-C61 compatible
- Ubiquiti Networks UF-SM-1G-S compatible
- Waystream (ex. Packetfront) SFP-1000CWDM-61 compatible
- Zyxel SFP-LHX1310-40 compatible
- Zyxel SFP-ZX-80 compatible
What customers say
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.
One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.
The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.
In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.