STM-4 SFP CWDM ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~140 km / 39 dB
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Type | CWDM STM-4 |
Distance | 140 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 100 Mbit/s - 622 Mbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 39 dB |
Transmit min/max per lane | 2 dBm / 7 dBm |
Receiver min/max per lane | -37 dBm / -10 dBm (overload) |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1100 - 1650 nm |
Laser | DFB |
---|---|
Receiver Type | APD |
Modulation | NRZ |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- ECI OTR1_S3 compatible
- ECI OTR4_S3 compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.