STM-4 SFP CWDM ~120 km / 34 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~120 km / 34 dB
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM STM-4 |
Distance | 120 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 100 Mbit/s - 622 Mbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 34 dB |
Transmit min/max per lane | 2 dBm / 7 dBm |
Receiver min/max per lane | -32 dBm / -8 dBm (overload) @100M - 800M |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1100 - 1600 nm |
Laser | DFB |
---|---|
Receiver Type | PIN |
Modulation | NRZ @100M - 800M |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN 1442703PG8 compatible
- ADVA # compatible
- Allied Telesis # compatible
- Aruba Networks(ex. HP Network) # compatible
- Avaya (ex. Nortel) # compatible
- Brocade # compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Ciena XCVR-A00D61 compatible
- Cisco Systems # compatible
- D-LINK # compatible
- Dell # compatible
- Edge Core # compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Force10 / Juniper # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei eSFP-1550nm-L-1.2 compatible
- Infinera (ex. Transmode) # compatible
- Intel # compatible
- Juniper # compatible
- Juniper (ex BTI Systems) # compatible
- Keymile 37013190 compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- Marconi SU67AD compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV # compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) # compatible
- Nokia Siemens Networks # compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK # compatible
- Transition Networks TN-SFP-OC12S-61 compatible
- Ubiquiti Networks # compatible
- Waystream (ex. Packetfront) # compatible
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.