STM-4 SFP CWDM ~80 km / 28 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 622 Mbit/s
Powerbudget of 28 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • pl_lambda CWDM
  • pl_distance ~80 km / 28 dB
  • pl_datarate 622 M
Protocols
  • 100M ETH
  • STM-1
  • STM-4
information-circle
Selection "S2":
Country of Origin
Germany,
Belgium,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1606.28.xD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
information-circle You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.
pdp_spec

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code CWDM STM-4
Operating Temperature Standard
Distance 80 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 622 Mbit/s
Digital Diagnostic Monitoring (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 28 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -28 dBm / -8 dBm (overload) @100M - 800M
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1100 - 1650 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100M - 800M
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols Fast Ethernet, STM-1, STM-4
FLEXBOX

Transceiver Configuration with FLEXBOX

It's that easy to use
insert
Insert into the FLEXBOX
select
Select and Configure
use
Use with Device
pdp_comp

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # compatible
  • ADTRAN 1442703PG8 compatible
  • ADVA # compatible
  • Allied Telesis # compatible
  • Aruba Networks(ex. HP Network) # compatible
  • Avaya (ex. Nortel) # compatible
  • Brocade # compatible
  • Brocade / Ruckus E1MG-100FX-LR-OM compatible
  • Check Point # compatible
  • Ciena (ex. Nortel) NTTP04CF compatible
  • Ciena XCVR-080D61 compatible
  • Cisco Systems # compatible
  • D-LINK # compatible
  • Dell # compatible
  • Edge Core # compatible
  • Ericsson RDH90120/61728 compatible
  • Extreme # compatible
  • Extreme (ex. Enterasys) # compatible
  • F5 Networks # compatible
  • FibroLAN # compatible
  • Fluke Networks # compatible
  • Force10 / Juniper # compatible
  • Fortinet # compatible
  • Fujitsu # compatible
  • H3C (ex. 3COM) # compatible
  • Hirschmann # compatible
  • HP H3C # compatible
  • Huawei # compatible
  • Infinera (ex. Transmode) # compatible
  • Intel # compatible
  • Juniper # compatible
  • Juniper (ex BTI Systems) # compatible
  • Keymile # compatible
  • KTI Networks # compatible
  • LANCOM # compatible
  • Lenovo (ex. Blade Network) # compatible
  • LevelOne # compatible
  • Lynx # compatible
  • Marconi SU67AC compatible
  • MikroTik # compatible
  • Motorola # compatible
  • Moxa # compatible
  • MRV # compatible
  • Netgear # compatible
  • Nokia (ex. Alcatel-Lucent) # compatible
  • Nokia Siemens Networks V50017-U332-K500 compatible
  • Palo Alto Networks # compatible
  • Radware # compatible
  • TP-LINK # compatible
  • Transition Networks TN-SFP-OC12S-C61 compatible
  • Ubiquiti Networks # compatible
  • Waystream (ex. Packetfront) # compatible
Your vendor / compatibility is missing?
pdp_recom

What customers say

After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!

Adil Demiri CTO / SGN d.o.o.

First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!

Julien BENNET Technical Director / Areal

Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015!
Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products.
I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility.
Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent.
Thanks a lot guys!

Francis Monestier System & Network Engineer / JigWan

Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX.
Having Universal Transceiver on stock and instantly program them to customer's need is amazing.

Elmar Gruber CTO/ H82 medientechnik GmbH
More chevron-right