100G QSFP28 BiDi ER with dual CDR 40 km, ᵀˣ1309 / ᴿˣ1305 nm, LC-Simplex, Singlemode

Universal QSFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 40 km via Singlemode OS2
LC-Simplex Connector
Specs
  • 1309 nm
  • 40 km
  • 106.25 G
  • LC
Protocols
  • 100G ETH
Part number
Q.B161HG.40.ZY
In stock
0 pcs
Back In Stock
Estimated arrival of additional items.
Our order confirmation will provide the final shipping date.
  • ~Jul 24, 2023
    +10 pcs
  • ~Jul 31, 2023
    +20 pcs
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor QSFP28
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Type BiDi ER
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 4.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 15.5 dB
Transmit min/max per lane 1.5 dBm / 7.1 dBm
Receiver min/max per lane -14 dBm / -2.6 dBm (overload)
Wavelength TX (Typical) 1309.1 nm
Wavelength TX (Range) 1308.6 - 1309.7 nm
Wavelength RX (Typical) 1304.6 nm
Wavelength RX (Range) 1304.1 - 1305.1 nm
Laser EML
Receiver Type APD
Modulation PAM4
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.

The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!

Viktor Ekmark Cloud Infrastructure Engineer / Elastx AB
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
Sylvain Brisebois Advance Research, Senior Firmware Engineer, KINOVA

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH
More