100G QSFP28 BiDi ER Industrial with dual CDR 40 km, ᵀˣ1309 / ᴿˣ1305 nm, LC-Simplex, Singlemode

- 1309 nm
- 40 km
- 106.25 G
- LC
- 100G ETH
-
Alternatives
-
Alternatives
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi ER |
Operating Temperature | Industrial |
Modulation | PAM4 |
Distance | 40 km |
Temperature Range | -20°C - 85°C |
Bandwidth | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 5.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 15.5 dB |
Transmit min/max per lane | 1.7 dBm / 7.1 dBm |
Receiver min/max per lane | -13.8 dBm / -3.4 dBm (overload) @100G |
Wavelength TX (Typical) | 1309.1 nm |
Wavelength TX (Range) | 1308.1 - 1310.2 nm |
---|---|
Wavelength RX (Typical) | 1304.6 nm |
Wavelength RX (Range) | 1303.5 - 1305.6 nm |
Laser | EML |
Receiver Type | APD |
Modulation | PAM4 @100G |
Transmit and Dispersion Penalty | 3.9 dB |
Extinction Ratio | 5 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX.
Having Universal Transceiver on stock and instantly program them to customer's need is amazing.
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.