10G SFP+ BiDi LR 20 km, ᵀˣ1330 / ᴿˣ1270 nm, LC-Simplex, Singlemode
- 1330 nm
- 20 km
- 11.3 G
- BiDi
- 10G ETH
- 10G FC
- 1G ETH
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LR |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 20 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 614 Mbit/s - 11.3 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10.4 dB |
| Transmit min/max per lane | -4 dBm / 0.5 dBm |
| Receiver min/max per lane | -14.4 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1330 nm |
| Wavelength TX (Range) | 1320 - 1340 nm |
|---|---|
| Wavelength RX (Typical) | 1270 nm |
| Wavelength RX (Range) | 1260 - 1280 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 12811 compatible
- ADVA 1061701851-02 compatible
- Allied Telesis AT-SP10LR compatible
- Arista 3rd_Party SFP-10G-LR compatible
- Arista SFP-10G-LR compatible
- Aruba Networks(ex. HP Network) J9151A compatible
- Avaya (ex. Nortel) # 12817 compatible
- Brocade / Ruckus 10G-SFPP-LR compatible
- Brocade 10G-SFPP-LR compatible
- Calix 100-02169 compatible
- Check Point # 12819 compatible
- Chelsio # 12820 compatible
- Ciena (ex. Nortel) NTTP30CFE6 compatible
- Ciena XCVR-S10U33 compatible
- Cisco Systems SFP-10G-BXD-I compatible
- Cisco Systems SFP-10G-LR compatible
- D-LINK DEM-436XT-BXD compatible
- Dell (ex. Force10) GP-10GSFP-1L compatible
- Dell 331-5310 compatible
- Dell 407-BBOP compatible
- Edge Core ET5402-LR compatible
- Extreme (ex. Enterasys) 10GB-LR-SFP compatible
- Extreme 10302 compatible
- F5 Networks # 12824 compatible
- FibroLAN SFPP-S13-20 compatible
- Fluke Networks OPVXG-SFP-PLUS-LR compatible
- Fortinet FN-TRAN-SFP+LR compatible
- Fujitsu S26361-F3986-E4 compatible
- HP H3C JD094B compatible
- Huawei OSX010000 compatible
- Huawei SFP-10G-BXD1 compatible
- Infinera (ex. Coriant) 81.73T-BX3327LR-R6 compatible
- Infinera (ex. Transmode) TRX100100 compatible
- Intel E10GSFPLR compatible
- Juniper SFP-10GE-LR compatible
- Keymile 37973134 compatible
- KTI Networks # 12833 compatible
- LANCOM SFP-BiDi1270-LC10 compatible
- Lenovo (ex. Blade Network) # 12830 compatible
- LevelOne # 12835 compatible
- MikroTik S+32LC10D compatible
- Moxa # 12837 compatible
- MRV # 12838 compatible
- Netgear AXM762 compatible
- Nokia (ex. Alcatel-Lucent) 3HE05037AB compatible
- Nokia Networks FORW 473756A.101 compatible
- Nokia Siemens Networks # 12839 compatible
- Nokia Siemens Networks 3FE62600DA compatible
- Nvidia (ex. Mellanox) MFM1T02A-LR compatible
- Palo Alto Networks PAN-SFP-PLUS-LRU compatible
- Planet MTB-LB20 compatible
- QNAP SFP+ Bidi D compatible
- Radware # 12841 compatible
- Ribbon (ex. ECI) OTP10_S33BD compatible
- Sophos ASG0000LR compatible
- Supermicro # 12843 compatible
- Transition Networks TN-10GSFP-LRB22 compatible
- Ubiquiti Networks UF-SM-10G-S RD compatible
- Waystream (ex. Packetfront) SFP-10GE-BX-D compatible
- Zyxel SFP10G-LR compatible
What customers say
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!