25G SFP28 LR with dual CDR 20 km, λ1310 nm, LC-Duplex, Singlemode

- 1310 nm
- 20 km
- 25.78 G
- 10G ETH
- 25G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | LR |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 20 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 1.2 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 13.5 dB |
Transmit min/max per lane | -0.5 dBm / 5 dBm |
Receiver min/max per lane | -14 dBm / 2.5 dBm (overload) @25G |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1295 - 1325 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1365 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @25G |
Transmit and Dispersion Penalty | 2.7 dB |
Extinction Ratio | 4 dB |
Supported Protocols | 25G Ethernet, 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Mod. SFP-10/25G-LR-S compatible
- Fortinet FG-TRAN-SFP28-LR compatible
What customers say
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.