4x 100G QSFP-DD DR4 with dual CDR 500 m, 4x λ1310 nm, SN-Duplex, Singlemode

- 4x 1310 nm
- 500 m
- 4x 106.25 G
- SN
- 100G ETH
- 400G ETH
- 4x 100G ETH
-
Matching Products
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | 4x SN-Duplex UPC |
Interface | Singlemode |
Compliance Code | 4x DR4 |
Operating Temperature | Standard |
Modulation | PAM4 |
Distance | 500 m |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 4x 106.25 Gbit/s |
---|---|
Bandwidth Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 8 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 3 dB |
Transmit min/max per lane | -2.9 dBm / 4 dBm |
Receiver min/max per lane | -5.9 dBm / 4 dBm (overload) @100G |
---|---|
Wavelength TX (Typical) | 4x 1310 nm |
Wavelength TX (Range) | 1304.5 - 1317.5 nm |
Wavelength RX (Typical) | 4x 1310 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @100G |
Extinction Ratio | 3.5 dB |
Supported Protocols | 4x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QDD-400G-XDR4-S compatible
- Arista QDD-400G-XDR4-S compatible
What customers say
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.