1G SFP, 100 GHz Grid - C-Band DWDM ZX+ 100 km / 32 dB, DDM, LC-Duplex
- DWDM 100 GHz
- 100 km
- 1.25 G
- 1G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ZX+ |
Distance | 100 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.55 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 32 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -32 dBm / -10 dBm (overload) @1G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1528 - 1566 nm |
Laser | EML |
---|---|
Receiver Type | APD |
Modulation | NRZ @1G |
Transmit and Dispersion Penalty | 2 dB |
Chromatic Dispersion Tolerance | 2,400 ps/nm @1G |
Extinction Ratio | 8.2 dB |
Supported Protocols | Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems SFP-GE-Z compatible
- Evertz SFP1G-TRD610H compatible
- Juniper SFP-1GE-LH compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!