2.67G SFP STM-16 120 km, λ1550 nm, DDM, LC-Duplex, Singlemode

Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 2.67 Gbit/s
Up to 120 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1550 nm
  • 120 km
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1526.B.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
2.67G SFP STM-16 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode 
2.67G SFP STM-16 | 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode
0 pcs in stock As low as 109.77 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
27 pcs in stock 95.04 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.33 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code STM-16
Distance 120 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 32 dB
Transmit min/max per lane 2 dBm / 7 dBm
Receiver min/max per lane -30 dBm / -9 dBm (overload) @2G
Wavelength TX (Typical) 1550 nm
Wavelength TX (Range) 1500 - 1600 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @2G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1184560PG7 compatible
  • Ciena (ex. Nortel) # 14854 compatible
  • Keymile 37972331 compatible
  • Marconi SU68AD compatible
  • Moxa SFP-1GEZXLC-120 compatible
  • Net Insight NPA0022-XL21 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB194670006 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196360007 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196370009 compatible
  • Nokia-Siemens (ex. Atrica) AT10012-0D compatible
  • RAD SFP-20EDH compatible
  • Ribbon (ex. ECI) OTR1_X5 compatible
  • Viavi (ex. JDSU) CSFP-2G5-5-1 compatible
  • Westermo 1100-0140 compatible
  • Westermo 1100-0171 compatible
Your vendor / compatibility is missing?

What customers say

We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.
Brian Masiga Network Engineer, Research and Education Network for Uganda

The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.

Robert Niedermair IT Infrastructure Administrator, INTERCABLE AUTOMOTIVE SOLUTIONS S.r.l.
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba CTO, Neocarrier Communications
More