2.67G SFP STM-16 40 km, λ1550 nm, DDM, LC-Duplex, Singlemode

Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 2.67 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1550 nm
  • 40 km
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1526.40.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
2.67G SFP STM-16 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode 
2.67G SFP STM-16 | 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode
0 pcs in stock As low as 108.63 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
28 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code STM-16
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 18 dB
Transmit min/max per lane -2 dBm / 3 dBm
Receiver min/max per lane -20 dBm / -3 dBm (overload) @2G
Wavelength TX (Typical) 1550 nm
Wavelength TX (Range) 1500 - 1600 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @2G
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Coriant (ex. Tellabs) TR-0008 compatible
  • Cyan 280-0011-00 compatible
  • Cyan 280-0194-00 compatible
  • Dell (ex. Force10) GP-SFP2-OC48-1IR2 compatible
  • FiberPlex SFP-SC48XC-5555-C compatible
  • GE (General Electric) STM-16.LR compatible
  • MRV SFP-MR27D-IR2-R compatible
  • Net Insight NPA0022-LL11 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB376370003 compatible
  • Ribbon (ex. ECI) OTR16_L3 compatible
  • Viavi (ex. JDSU) CSFP-2G5-5-2 compatible
Your vendor / compatibility is missing?

What customers say

We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH
More