100G QSFP28 to 4x SFP28 Breakout AOC with CDR (TX / RX) Multimode Fiber, 1 - 100 m
Universal Active Optical Cable (AOC) with CDR (TX / RX), 1 - 100 m
Use FLEXBOX to configure to almost any vendor
QSFP28 to SFP28
Supports 100G to 4x 25G Ethernet interoperability
Supports Datarates from 25.78 to 112.2 Gbit/s
Modules are permanently attached to each end
Low power consumption < 7.5 W (less than 3.5 W per terminal)
Easy cable routing thanks to small diameter (Ø 2 mm) and bend radius
Connect different host systems by configuring each side individually
Specs
- Fiber
- 1m - 100m
- 112.2 G
- Active
Protocols
- 25G ETH
-
Alternatives
-
Alternatives
Specification
Compliance Code | AOC Breakout |
---|---|
Form Factor | QSFP28 to 4x SFP28 |
Interface | Active Optical Cable |
Length | 100 m |
Temperature Range | 0°C - 70°C |
---|---|
Bandwidth | 103.12 Gbit/s - 112.2 Gbit/s |
Digital Diagnostic Management (DDM) | not implemented |
Power Consumption | 7.5 W (3.5 W + 4x 1 W) |
CDR | TX and RX |
---|---|
Modulation | NRZ |
Supported Protocols | 25G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade 40G-QSFP-4SFP-AOC-1001 compatible
- Cisco Systems QSFP-100G-SR4-S compatible
- Dell AOC-QSFP28-100G-100M compatible
- Edge Core ET7402-25AOC-100M compatible
- Extreme 10443 compatible
- Nvidia (ex. Mellanox) MMA1B00-C100D compatible
Your vendor / compatibility is missing?
What customers say
Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX.
Having Universal Transceiver on stock and instantly program them to customer's need is amazing.
Elmar Gruber
H82 medientechnik GmbH
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015!
Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products.
I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility.
Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent.
Thanks a lot guys!
Francis Monestier
System & Network Engineer / JigWan
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne
Retired scientist, now acting in the field of IT support, R.O. Kuehne