100G QSFP28 LR with dual CDR 10 km, λ1311 nm, LC-Duplex, Singlemode
QSFP28
LR
Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Specs
- 1311 nm
- 10 km
- 106.25 G
- LC
Protocols
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LR |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 4.3 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 6.3 dB |
| Transmit min/max per lane | -1.4 dBm / 4.5 dBm |
| Receiver min/max per lane | -7.7 dBm / 4.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 1311 nm |
| Wavelength RX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista QSFP-100G-LR compatible
- Cisco Systems QSFP-100G-LR-S compatible
- Dell 407-BCDH compatible
- Extreme 100G-LR4-QSFP10KM compatible
- Huawei QSFP28-100G-1310 (34062613) compatible
- Juniper JNP-QSFP-100G-LR4 compatible
- Juniper QSFP-100G-LR compatible
- Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
- Nokia Networks 3AL82074AA compatible
- Nvidia (ex. Mellanox) MMA1L10-CR compatible
- Arista 3rd_Party 100GBASE-LR compatible
Your vendor / compatibility is missing?
What customers say
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN.
Thank you FLEXOPTIX
Sylvain Brisebois
Advance Research, Senior Firmware Engineer, KINOVA
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections
The FLEXBOX is the best thing since sliced bread!
Stefan Ideler
CTO, i3D.net