100G QSFP28 ER with dual CDR 40 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 106.25 G
- LC
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER |
| Operating Temperature | Standard |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 4.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 17.7 dB |
| Transmit min/max per lane | 1.7 dBm / 7.1 dBm |
| Receiver min/max per lane | -16 dBm / -3.4 dBm (overload) @100G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1308.1 - 1310.2 nm |
| Wavelength RX (Typical) | 1310 nm |
|---|---|
| Wavelength RX (Range) | 1308.1 - 1310.2 nm |
| Laser | EML |
| Receiver Type | APD |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 3.9 dB |
| Extinction Ratio | 5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-ER compatible
- Arista 3rd_Party QSFP-100G-LR compatible
- Arista QSFP-100G-ER compatible
- Arista QSFP-100G-LR compatible
- Cisco Systems QSFP-100G-ERL-S compatible
- Juniper JNP-QSFP-100G-LR4 compatible
- Nokia (ex. Alcatel-Lucent) 3HE16557AA compatible
What customers say
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.