100G QSFP28 ER4 Lite with dual CDR 30 km, λ1296-1309 nm, LC-Duplex, Singlemode
QSFP28
ER4 Lite
Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-ER4 Lite Ethernet links
Integrated Clock-Data-Recovery (CDR)
up to 40km on OS2 with FEC in host
Supported Data Rates: 103.12 Gbit/s
Up to 30 km via Singlemode OS2
LC-Duplex Connector
Specs
- int. Mux
- 30 km
- 103.12 G
- LC
Protocols
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER4 Lite |
| Distance | 30 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s |
| Bandwith Per Lane | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 15.6 dB |
| Transmit min/max per lane | -2.9 dBm / 4.5 dBm |
| Receiver min/max per lane | -18.5 dBm / -7 dBm (overload) @100G |
| Wavelength TX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
| Wavelength RX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
|---|---|
| Laser | EML |
| Receiver Type | APD |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 2.5 dB |
| Extinction Ratio | 7 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-ERL4 compatible
- Arista QSFP-100G-ERL4 compatible
- Aruba Networks(ex. HP Network) JL310A compatible
- Avaya (ex. Nortel) AA1405001-E6 compatible
- Ciena 160-9405-900 compatible
- Cisco Systems QSFP-100G-ER4L-S compatible
- Cisco Systems QSFP-100G-LR4-S compatible
- Cumulus Networks QSFP28 ER4 compatible
- Dell QSFP28-100G-LR4 compatible
- Edge Core QSFP28 LR4 compatible
- Extreme 100G-LR4-QSFP10KM compatible
- Extreme 10403 compatible
- Huawei QSFP28 LR4 compatible
- Infinera (ex. Coriant) ZXS-Q8L4ZZZZ-00 compatible
- Infinera TOM-100G-Q-LR4 compatible
- IP Infusion QSFP28 ER4 compatible
- Juniper QSFP-100G-ER4L compatible
- Net Insight NPA0144-ER4L compatible
- Nokia (ex. Alcatel-Lucent) 3AL82152AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE11239AA compatible
- Palo Alto Networks PAN-QSFP28-100GBASE-ER4 compatible
Your vendor / compatibility is missing?
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba
CTO, Neocarrier Communications
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou
Senior Network Consultant, CDMA Services Ltd
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn
Telecommunications Infrastructure Security Professional