100G QSFP28 LR4 ext. with dual CDR 25 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 25 km
- 111.8 G
- LC
- 100G ETH
- 128G FC
- OTU4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | LR4 ext. |
Distance | 25 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s - 111.8 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s - 27.95 Gbit/s |
---|---|
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 4.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 8.1 dB |
Transmit min/max per lane | -2.5 dBm / 4.5 dBm |
Receiver min/max per lane | -10.6 dBm / 4.5 dBm (overload) @100G |
---|---|
Wavelength TX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
Wavelength RX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | NRZ @100G |
Extinction Ratio | 4 dB |
Supported Protocols | 100G Ethernet, 128G Fibre Channel, OTU4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061800720-01 compatible
- Arista 3rd_Party QSFP-100G-ERL4 compatible
- Arista QSFP-100G-ERL4 compatible
- Brocade 100G-QSFP28-LR4L-10KM compatible
- Ciena QSFP28 LR4 compatible
- Ciena XCVR-Q30V31 compatible
- Cisco Systems ONS-QSFP28-LR4 compatible
- Cisco Systems QSFP-100G-ER4L-S compatible
- Cisco Systems QSFP-100G-LR4-S compatible
- Cumulus Networks QSFP28 ER4 compatible
- Dell 407-BBSL compatible
- Dell QSFP28-100G-LR4 compatible
- Edge Core QSFP28 LR4 compatible
- Extreme 100G-ER4LT-QSFP40KM compatible
- Extreme 100G-LR4-QSFP10KM compatible
- Extreme 10403 compatible
- F5 Networks OPT-0039-01 compatible
- HP H3C JL275A compatible
- Huawei QSFP28 LR4 compatible
- Infinera (ex. Coriant) ZXS-Q8L4ZZZZ-00 compatible
- Infinera TOM-100G-Q-LR4 compatible
- Infinera TOM-100G-Q-LR4L compatible
- Juniper JNP-QSFP-100G-LR4 compatible
- Juniper QSFP-100G-ER4L compatible
- Juniper QSFP-100G-LR4 compatible
- Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
- Nvidia (ex. Mellanox) MMA1L10-CR compatible
What customers say
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!