10G SFP+ BiDi LR Industrial 10 km, ᵀˣ1270 / ᴿˣ1330 nm, LC-Simplex, Singlemode
- 1270 nm
- 10 km
- 11.3 G
- Industrial
- 10G ETH
- 10G FC
- 1G ETH
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LR |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 614 Mbit/s - 11.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.5 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4.4 dB |
| Transmit min/max per lane | -8.2 dBm / 0.5 dBm |
| Receiver min/max per lane | -12.6 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1270 nm |
| Wavelength TX (Range) | 1260 - 1280 nm |
|---|---|
| Wavelength RX (Typical) | 1330 nm |
| Wavelength RX (Range) | 1320 - 1340 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 12669 compatible
- Accedian Networks 7ST-400 compatible
- ADVA # 12670 compatible
- Allied Telesis AT-SP10LR compatible
- Arista 3rd_Party SFP-10G-LR compatible
- Arista SFP-10G-LR compatible
- Aruba Networks(ex. HP Network) J9151A compatible
- Avaya (ex. Nortel) # 12674 compatible
- Brocade / Ruckus 10G-SFPP-LR compatible
- Brocade 10G-SFPP-LR compatible
- Calix 100-03498 compatible
- Check Point # 12676 compatible
- Chelsio # 12677 compatible
- Ciena (ex. Nortel) # 12678 compatible
- Cisco Systems SFP-10G-BXU-I compatible
- D-LINK DEM-432XT-DD compatible
- Dell # 12679 compatible
- Dell (ex. Force10) GP-10GSFP-1L compatible
- Edge Core ET5402-LR compatible
- Extreme (ex. Enterasys) 10GB-BX10-U compatible
- Extreme 10302 compatible
- F5 Networks # 12683 compatible
- Fluke Networks # 12684 compatible
- Fortinet # 12686 compatible
- Fujitsu # 12687 compatible
- HP H3C JD094B compatible
- Huawei SFP-10G-BXU1 compatible
- Infinera (ex. Transmode) # 12706 compatible
- Intel E10GSFPLR compatible
- Juniper JNP-SFP-10G-BX10U compatible
- Juniper SFP-10GE-LR compatible
- Keymile # 12693 compatible
- KTI Networks # 12694 compatible
- LANCOM # 12695 compatible
- Lenovo (ex. Blade Network) # 12690 compatible
- LevelOne # 12696 compatible
- MikroTik S+23LC10D compatible
- Moxa SFP-10GLRLC compatible
- MRV # 12700 compatible
- Netgear # 12701 compatible
- Nokia (ex. Alcatel-Lucent) 3FE62600DA compatible
- Nokia Networks P206994 compatible
- Nokia Siemens Networks # 12702 compatible
- Palo Alto Networks # 12703 compatible
- QNAP SFP+BidiU compatible
- RAD SFP-P-5BDH compatible
- Radware # 12704 compatible
- Supermicro # 12705 compatible
- Ubiquiti Networks UF-SM-10G-S BU compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.