10G SFP+ LR Extended with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode

Universal SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.3 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -5°C to 85°C
Specs
  • 1310 nm
  • 10 km
  • 11.3 G
  • Extended
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
P.1396.10.IR:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Temperature Range
10G SFP+ LR with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode 
10G SFP+ LR with dual CDR | 10 km, λ1310 nm, LC-Duplex, Singlemode
36 pcs in stock As low as 85.59 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR
Distance 10 km
Temperature Range -5°C - 85°C
Bandwidth 8.5 Gbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 6.2 dB
Transmit min/max per lane -8.2 dBm / 0.5 dBm
Receiver min/max per lane -14.4 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1270 - 1355 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1565 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @10G
Transmit and Dispersion Penalty 3.2 dB
Extinction Ratio 5 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # 12358 compatible
  • ADTRAN # compatible
  • ADVA # compatible
  • Allied Telesis # 12360 compatible
  • Arista 3rd_Party # 12361 compatible
  • Aruba Networks(ex. HP Network) J9151A compatible
  • Avaya (ex. Nortel) # 12362 compatible
  • Brocade / Ruckus 10G-SFPP-LR compatible
  • Brocade 10G-SFPP-LR compatible
  • Calix 100-01512 compatible
  • Check Point # 12364 compatible
  • Chelsio # 12365 compatible
  • Ciena (ex. Nortel) # 12366 compatible
  • Cisco Systems SFP-10G-LR compatible
  • D-LINK # 12368 compatible
  • Dell # 12367 compatible
  • Dell (ex. Force10) # 12373 compatible
  • Edge Core # compatible
  • Extreme # 12370 compatible
  • Extreme (ex. Enterasys) # 12369 compatible
  • F5 Networks # 12371 compatible
  • FibroLAN # compatible
  • Fluke Networks # 12372 compatible
  • Fortinet # 12374 compatible
  • Fujitsu # 12375 compatible
  • HP H3C JD094B compatible
  • Huawei OSX010000 compatible
  • Infinera (ex. Transmode) # 12393 compatible
  • Intel E10GSFPLR compatible
  • Juniper # 12380 compatible
  • Keymile # 12381 compatible
  • KTI Networks # 12382 compatible
  • LANCOM # 12383 compatible
  • Lenovo (ex. Blade Network) # 12378 compatible
  • LevelOne # 12384 compatible
  • MikroTik S+31DLC10D compatible
  • Motorola # compatible
  • Moxa # 12386 compatible
  • MRV # 12387 compatible
  • Netgear # 12388 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE04823AA compatible
  • Nokia Siemens Networks # 12389 compatible
  • Nvidia (ex. Mellanox) # compatible
  • Oracle # compatible
  • Packetlight SL110 compatible
  • Packetlight SL112 compatible
  • Palo Alto Networks # 12390 compatible
  • Radware # 12391 compatible
  • Ribbon (ex. ECI) OTPMR_PI3 compatible
  • Solarflare # compatible
  • Supermicro # 12392 compatible
  • TP-LINK # compatible
  • Transition Networks # compatible
  • Zyxel # compatible
Your vendor / compatibility is missing?

What customers say

The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.

Sebastian Giss System Engineer/cyon.ch
Since we ordered a FLEXBOX, our life as definitly changed. There’s a before and an after FLEXBOX. So many vendors in the compatibility matrice, so easy way to configure the module! And the cables and accessories came also with quality.
Stéphane Gouron Directeur Agence Ouest, S-cube.
For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol
More