10G SFP+ CWDM LR Extended ~10 km / 10 dB, 1270 nm - 1610 nm, LC-Duplex
SFP+
CWDM LR
Universal SFP+ Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 10GBASE-LR Ethernet links
Supported Data Rates: 614 Mbit/s - 11.3 Gbit/s
Powerbudget of 10 dB for up to 10 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 75°C
Specs
- CWDM
- ~10 km / 10 dB
- 11.3 G
- Industrial
Protocols
- 10G ETH
- 10G FC
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM LR |
| Distance | 10 km |
| Temperature Range | -20°C - 75°C |
| Bandwidth | 614 Mbit/s - 11.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
| Power Consumption | 1.2 W |
|---|---|
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
|---|---|
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2 dB |
| Chromatic Dispersion Tolerance | 0 ps/nm to 180 ps/nm @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems CWDM-SFP10G-1610 compatible
- Extreme 10302 compatible
- Intel E10GSFPLR compatible
- Juniper EX-SFP-10GE-LR compatible
Your vendor / compatibility is missing?
What customers say
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham
Senior Network Engineer - Airspeed Telecom
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
Christian Brasolin
Senior System Engineer / Netica SRL
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle
Director Infrastructure Services, Avira Operations GmbH & Co.KG