400G QSFP-DD ER4 Lite with dual CDR 30 km, λ1296-1309 nm, LC-Duplex, Singlemode

Universal QSFP-DD Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 400GBASE-ER4 Lite Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 425 Gbit/s
Up to 30 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 30 km
  • 425 G
  • LC
Protocols
  • 400G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
D.164HG.30:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Different Wavelength
400G QSFP-DD ER4 with dual CDR 40 km, λ1304-1310 nm, LC-Duplex, Singlemode 
400G QSFP-DD ER4 with dual CDR | 40 km, λ1304-1310 nm, LC-Duplex, Singlemode
2 pcs in stock 5,861.50 EUR
Lower Power Budget
400G QSFP-DD ER4 Lite with dual CDR 25 km, λ1296-1309 nm, LC-Duplex, Singlemode 
400G QSFP-DD ER4 Lite with dual CDR | 25 km, λ1296-1309 nm, LC-Duplex, Singlemode
0 pcs in stock 4,237.00 EUR
Different Wavelength
400G QSFP-DD ER8 with dual CDR 40 km, λ1274-1309 nm, LC-Duplex, Singlemode 
400G QSFP-DD ER8 with dual CDR | 40 km, λ1274-1309 nm, LC-Duplex, Singlemode
11 pcs in stock 6,484.23 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR

Specification

Form Factor QSFP-DD
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code ER4 Lite
Distance 30 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 425 Gbit/s
Bandwith Per Lane 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 12 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 17 dB
Transmit min/max per lane 0.4 dBm / 6.5 dBm
Receiver min/max per lane -16.6 dBm / -2.4 dBm (overload) @400G
Wavelength TX (Typical) 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm
Wavelength RX (Typical) 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm
Laser EML
Receiver Type APD
Modulation PAM4 @400G
Transmit and Dispersion Penalty 3.9 dB
Extinction Ratio 6 dB
Supported Protocols 400G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.

Murat Aybars Founder / Ideatomy
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH
More