200G QSFP-DD ER4 with dual CDR 40 km, λ1296-1309 nm, LC-Duplex, Singlemode
QSFP-DD
ER4
Universal QSFP-DD Transceiver
For 200GBASE-ER4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 212.5 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Specs
- int. Mux
- 40 km
- 212.5 G
- LC
Protocols
- 200G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER4 |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 212.5 Gbit/s |
| Bandwith Per Lane | 53.13 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 12 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 15.5 dB |
| Transmit min/max per lane | 0.4 dBm / 6.6 dBm |
| Receiver min/max per lane | -15.1 dBm / -8.7 dBm (overload) @200G |
| Wavelength TX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
| Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
|---|---|
| Laser | EML |
| Receiver Type | APD |
| Modulation | PAM4 @200G |
| Transmit and Dispersion Penalty | 3.2 dB |
| Extinction Ratio | 6 dB |
| Supported Protocols | 200G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use
1. Slide-In
- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
2. Insert A Transceiver
- Insert a Universal Transceiver into the corresponding slot
3. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
4. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner
Managing Director, Allegro Packets GmbH
As a network engineer responsible for programming universal transceivers, I can confidently say that the FLEXBOX is a true game-changer in the field. Its unparalleled capabilities and user-friendly interface makes the process effortless and highly efficient.
One of the standout features of the FLEXBOX is its ability to support a wide range of transceiver types and brands. Whether you're dealing with SFP, SFP+, QSFP, the FLEXBOX has got you covered.
Martin Fiegel
Network Engineer/ Soapeople.com
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba
CTO, Neocarrier Communications
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen
Infrastructure Engineer, Previder B.V