2x 100G QSFP-DD 4WDM-10 with dual CDR 10 km, λ1270-1330 nm, CS-Duplex, Singlemode

Universal QSFP-DD Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 100GBASE-4WDM-10 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 2x 103.12 Gbit/s
Up to 10 km via Singlemode OS2
2x CS-Duplex Connector
Specs
  • int. Mux
  • 10 km
  • 2x 103.12 G
  • CS
Protocols
  • 100G ETH
  • 200G ETH
  • 2x 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
D.161HG2.10.C:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
2x 100G QSFP-DD CWDM4 with dual CDR 2 km, λ1270-1330 nm, CS-Duplex, Singlemode 
2x 100G QSFP-DD CWDM4 with dual CDR | 2 km, λ1270-1330 nm, CS-Duplex, Singlemode
0 pcs in stock As low as 1,764.48 EUR
CS-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.5 m - 100 m 
CS-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 32.78 EUR
CS-Duplex to CS-Duplex Singlemode cable A1 9/125 µm, yellow, 0.5 m - 100 m 
CS-Duplex to CS-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 71.30 EUR

Specification

Form Factor QSFP-DD
Connector / Polish 2x CS-Duplex UPC
Interface Singlemode
Compliance Code 2x 4WDM-10
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 2x 103.12 Gbit/s
Bandwith Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 7 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 2.1 dB
Transmit min/max per lane -6.5 dBm / 2.5 dBm
Receiver min/max per lane -8.6 dBm / 2.5 dBm (overload) @100G
Wavelength TX (Typical) 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm
Wavelength RX (Typical) 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100G
Transmit and Dispersion Penalty 3 dB
Extinction Ratio 3.5 dB
Supported Protocols 2x 100G Ethernet, 200G Ethernet, 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
James Rice Jump Networks Ltd
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg CTO - Icera Networks
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!
Martin Verges Managing director, croit GmbH

When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.

Stefan Lieven Teamleitung EDV / Pflegeheime Esslingen
More